Router Table Combo #1
17” Range LS Standard System with 24” x 36”
Router Table and Stand Part Number: RT COMBO#1
This is the ideal solution for getting the
most out of a small workshop. The 24"
x 36" Router Table is quite compact,
but the offset router plate allows for good
capacity with the LS17 Standard System. The
base of the LS positioner is slotted to allow
it to be positioned entirely on the router
table for normal use, or it can be easily
slid back to overhang the edge of the table
for maximum capacity for box joints or dovetails.
Don't forget to add a Wheel Kit if you need
your equipment to be mobile in a small shop.
All INCRA Router Tables and Combos
include
the outstanding MagnaLOCK Aluminum
Router
Mounting Plate, but you can also
upgrade
to an INCRA Mast-R-Lift or PRL-V2
Router
Lift for the ultimate in convenience.
|
|
|
| $569.99
|
Upon placement of order please specifiy the
plate model number needed.
Click here to see the list below and for
more details.
|
 |
 |
|
INCRA Shop Stop
Patented Automatic Positioning
Control and
micro adjustability mean instant,
repeatable
accuracy without measuring or
trial and error
setups.
|
 |
 |
INCRA JUMBO
Right Angle Fixture
The Right Angle Fixture is used to hold your
workpiece perpendicular to the
table surface
during end grain cutting operations. |
Four Sliding Scale
Template Channels
Two of the channels are used for primary
(distance from the cutter) and
floating (distance
from the last cut) reference
scales. This
leaves two more template channels
available
for additional setups and cutting
operations
without altering the scale positions
|
 |
MagnaLOCK Plate &
3 MagnaLOCK Ring Inserts
Solid Aluminum MagnaLOCK Plate
& 3 MagnaLOCK
Ring Inserts (1", 2 1/8
and 3 5/8"). |
The INCRA Router Table Plate is the Single
Most Important Part of any high-accuracy
router table. Our super-rigid, 3/8"-thick
aluminum MagnaLOCK Router Table Plates are
conveniently pre-drilled for the most popular
routers at no extra charge, and they’re available
without a router bolt pattern, if you prefer.
These 9-1/4” x 11-3/4” plates are standard
equipment with all five INCRA Router Tables
and will work with a few other brands of
tables.
The included steel reducing rings are held
securely by the MagnaLOCK system’s high energy, rare-earth magnets.
A simple leveling system at
each magnet and access holes in the rings
allow the rings to easily be
brought absolutely, perfectly flush with
the surrounding plate for the best
performance during the most demanding, high-accuracy
routing operations.
MagnaLOCK’S instant, tool-free ring changes
and perfectly flush fit for the rings make
it simply the most convenient and best-performing
ring system available. All of our mounting
plates include three laser-cut steel rings
with 1", 2-1/8" and 3-5/8"
openings, and many more ring sizes are available
as accessories.
A simple quarter turn of the corner mounted,
eccentric Cam-Lock screw
securely holds the plate snugly in the router
table's recess, eliminating
any play between the table and plate for
precise router work without the
need for shims. The access holes for the
in-table INCRA levelers are
threaded, and a set of ten leveling set screws
is available on request to
use the plates in other brands of router
tables
| MagnaLOCK Router Plate Models: |
|
| MLPUNDRILLED-AL |
| Solid Aluminum MagnaLOCK RT Plate - Undrilled |
|
| MLPM12V-AL |
| Solid Aluminum MagnaLOCK RT Plate for Hitachi
M12V |
|
| MLPFT2000-AL |
| Solid Aluminum MagnaLOCK RT Plate for Freud
FT-2000 |
|
| MLP7518-AL |
| Solid Aluminum MagnaLOCK RT Plate for PC
7518, 7539; Triton |
|
| MLP690890-AL |
| Solid Aluminum MagnaLOCK RT Plate for PC
690, 890, 7529; Makita 1101; Bosch 1617,
1618 |
|
| MLP621625-AL |
| Solid Aluminum MagnaLOCK RT Plate for DeWalt
621, 625; Fein RT1800 |
|
| MLP3612C-AL |
| Solid Aluminum MagnaLOCK RT Plate for Makita
3612-C |
|
| MLP1619-AL |
| Solid Aluminum MagnaLOCK RT Plate for Bosch
1619 |
|
| MLP1613-AL |
| Solid Aluminum MagnaLOCK RT Plate for Bosch
1613 |
| BACK TO TOP |
|
|
