A bandsaw is a must for any metal shop, and
with three speeds, an automatic shut
off,
and ball bearing blade guides, this
bandsaw
comes equipped with many important
performance
features. As an added feature, it has
a swiveling
headstock so there is no fussing with
establishing
the cut angle at the vise! Just set
the workpiece
length, and swivel the headstock to
an angle
between -45° to +60° and make the cut.
- Motor: 1/3 HP, 110V/220V, Single-phase, 60Hz,
1720 RPM
- Amps: 7 @ 110V, 3.5 @ 220V
- Drive: V-belt
- Transmission: sealed worm gear
- Max. capacity rectangular @ 0°: 5" x
6"
- Max. capacity circular @ 0°: 5"
- Max. capacity rectangular @ ±45°: 2-15/16"
x 3-3/4"
- Max. capacity circular @ ±45°: 3-3/4"
- Max. capacity rectangular @ +60°: 1-3/4"
x 2-3/16"
- Max. capacity circular @ +60°: 1-3/4"
- Blade speeds: 80, 120, 200 FPM
- Overall height: horizontal 42-1/2";
vertical 54-3/4"
- Floor to table height: 29"
- Overall width: 23-3/8"
- Overall length: 39"
- Overall bed: 19-1/4" x 13-1/2"
x 3"
- Footprint: 26-1/2" x 20-1/2"
- Angular cuts: -45° to +60°
- Blade size: 64-1/2" x 1/2"
- All ball bearing drive wheel and blade guides
- Approximate shipping weight: 176 lbs.
|
