• Cast iron construction throughout
• Induction hardened bedways
• Flame hardened headstock gears
• Tapered roller and ball bearings
• 6" 3-Jaw chuck
• 8" 4-Jaw chuck
• 12" faceplate
• Steady rest
• Follow rest
• Chip pan
• Splash guard
• Stand
• Threading dial
• 4-Way turret tool post
• 2 MT #3 dead centers
• Live center
• Jog button and emergency stop
• Motor 2 HP, 220V, single-phase, TEFC, 11.9 Amps, 60 Hz, 1750 RPM
• Swing over bed: 13-1/2"
• Swing over gap: 19"
• Swing over cross slide: 8"
• Distance between centers: 40"
• Bed width: 7-3/8"
• Spindle bore: 1-7/16"
• Spindle nose: D1-4 Camlock
• Spindle nose taper: MT #5
• Maximum carriage travel: 35"
• Cross slide travel: 6-1/4"
• Compound travel: 2-7/8"
• Maximum tool size: 1/2" x 1/2"
• Feed rod diameter: 3/4"
• Leadscrew: 7/8" x 8 TPI
• Range of longitudinal feeds (inches/rev.): .0036" - .1005"
• Range of cross feeds (inches/rev.): .00123" - .0345"
• Tailstock barrel taper: MT #3
• Tailstock barrel travel: 3-1/2"
• Number of speeds: 8
• Range of speeds: 78, 128, 210, 330, 510, 830, 1360, 2100 RPM
• Feed rate range: .0036" - .1005"
• Thread range (inches): 4 TPI-112 TPI
• Thread range (metric): 2-6 mm
• Overall length: 71-1/2"
• Overall width: 26"
• Height with stand: 52-1/2"
• Height of center line: 45-1/2"
• Approximate shipping weight: 1330 lbs.